Product Data Sheet Show all documents

SikaBit® T-5180 PG SA

Reinforced elastomeric bituminous waterproofing membrane torch applied

SikaBit® T-5180 PG SA is a high performance elastomeric torch-on sheet waterproofing membrane. It is based on SBS modified bitumen, reinforced with a 180 g/m2 polyester non-woven fabric, faced with a polyethylene film on both sides. Suitable for use in tropical and hot climatic conditions.

  • Resistant to ageing
  • Good tensile strength and elongation
  • High resistance to water vapour
  • Good dimensional stability
  • Flexible at low temperatures
  • Easy to install using the torch-on method
  • Good resistance to mechanical impact
Product Data Sheet Show all documents

Usage

SikaBit® T-5180 PG SA may only be used by experienced professionals. It is used as a waterproofing membrane for protection of various substrates in a wide range of application.
  • Waterproofing and damp-proofing of basements against permanent water submersion and damp soils, including pile capping and foundations
  • Waterproofing of retaining walls
  • Waterproofing on flat roofs under protective layers or ballast
  • Waterproofing on balconies, terraces and wetrooms under screed / tiles
 

Advantages

  • Resistant to ageing
  • Good tensile strength and elongation
  • High resistance to water vapour
  • Good dimensional stability
  • Flexible at low temperatures
  • Easy to install using the torch-on method
  • Good resistance to mechanical impact

Packaging

Roll size: 1 m (roll width) x 10 m (roll length)

Colour

Rolled sheet membrane, reinforced with polyester non-woven fabric with Polyethylene film on both sides for ease of installation

Colour: Black

Product Details

Product Information

Composition

SBS Modified Bitumen

Shelf life

12 months from date of production if stored properly in original unopened packaging.

Storage conditions

Rolls must be stored in their original package, in vertical position and under cool and dry conditions between temperatures of +5°C and +35°C. They must be protected from direct sunlight, rain, snow and ice.

Length

10.0 m (±1 %)

(EN 1848-1)

Width

1.0 m (±1 %)

(EN 1848-1)

Effective thickness

4 mm (±0.2 mm)

(EN 1849-1)

Mass per unit area

4.7 kg/m2 (±10 %)

(EN 1849-1)
Technical Information

Resistance to static puncture

~900 N, ~20 mm

(ASTM E154)

Tensile strength

Longitudinal

~850 N/50 mm (±20 %)

Transversal

~700 N/50 mm (±20 %)

Elongation

Longitudinal50 %  (±15)
Transversal55 %  (±15)

Tear strength

Longitudinal    ≥550 N
Transversal      ≥350 N

Joint shear resistance

≥500 N/50 mm

(EN 12317-1)

Foldability at low temperature

Available in -5 °C and -20 °C

(EN 1109)

Softening point

≥100 °C

(ASTM D36)

Resistance to water penetration

7 bar (70 m)

No leakage

Service temperature

0 °C min. / +35 °C max.

Application

Application Information

Ambient air temperature

+5 °C min. / +50 °C max.

Substrate temperature

+5 °C min. / +65 °C max.
Application steps

SUBSTRATE QUALITY

The supporting structure must be of sufficient structural strength to apply all new and existing layers of the waterproofing build-up. When used as a roofing membrane, the complete roof system must be designed and secured against wind uplift loadings.
The substrate must be uniform, firm, smooth and free of any sharp protrusion or burrs, clean, dry, free of grease, oil, dust and loosely adhering particles.

SUBSTRATE PREPARATION

Use the appropriate preparation equipment to achieve the required substrate quality.

Documents